Sterilizer maintenance

Correct and reasonable daily maintenance of the sterilizer is a reliable guarantee for its good working condition and long service life. Therefore, the maintenance of the sterilizer should be paid attention to in daily use.

During the routine maintenance of the sterilizer, the sterilizer should be operated in a state of power failure and internal pressurelessness, daily:

Wipe the foreign matter on the door rubber ring with a soft cloth or gauze;

Wipe the inner wall of the sterilization container, the partition frame and the surface of the tray with gauze with detergent and water. Do not use pot slag or steel brush to avoid damage to the inner wall of the sterilization chamber;

Periodic inspection;

Once a week, empty the clean water tank, the waste water tank, and then rinse with water. Check the safety valve once a month;

Fasten the wire joints and check the on-off status once a year, which should be completed by a professional electrician;

If it is not used for a long time, the water in the clean water tank and the waste water tank should be drained, and the sterilization should be wiped clean. Remember to close the door and cut off the electricity.