UV sterilizer application

First, the principle of ultraviolet disinfection

Ultraviolet rays can be classified into UV-A (320-400 nm), UV-B (275-320 nm), UV-C (200-275 nm) and vacuum ultraviolet portions according to their biological effects. In the water treatment, the UV-C portion of the ultraviolet ray is actually used, and in this band, ultraviolet rays having the highest sterilizing efficiency have been confirmed in the vicinity of 260 nm.

Second, UV disinfection has the following advantages:
1. High-efficiency sterilization: UV sterilization of bacteria and viruses can generally achieve a sterilization rate of 99%-99.9% in one to two seconds.
2, high-efficiency sterilization broad-spectrum: the broad spectrum of ultraviolet sterilization is the highest, it can kill almost all bacteria and viruses.
3, no secondary pollution: UV sterilization does not add any chemicals, so it will not cause secondary pollution of water bodies and the surrounding environment. Does not change any ingredients in the water.
4, Safe and reliable operation: The traditional disinfection technology such as the use of chloride or ozone, the disinfectant itself is highly toxic, flammable substances. The UV disinfection system does not have such a safety hazard.
5, the operation and maintenance costs are low: the ultraviolet disinfection equipment occupies a small area, the structure requirements are simple, so the total investment is less. The cost in terms of operation is also low. At the level of kiloton water treatment, its cost is only 1/2 of that of chlorine disinfection.
Third, LIVEWELL UV sterilizer disinfection equipment features
1. Select high-efficiency UV-C (LL or LH) UV lamp to choose the world's leading low-pressure high-intensity ultraviolet lamp. The service life of the lamp is guaranteed to be over 8000-10000 hours.
2, the use of high transmittance, high purity quartz casing, to ensure that the UV transmission is above 90%.
3. The world's advanced constant and high-intensity ultraviolet special ballasts are used to ensure the normal operation of the whole system under complicated conditions.
4. Use high-quality stainless steel as the reactor (304 or 316) and special inner surface of the reactor to improve the sterilization effect.